Registrieren
Rückwärts zu allen Nachrichten Rückwärts zu allen Nachrichten

Запуск "Зонд-6"

10 ноября 1968 года с космодрома Байконур был запущен советский лунный космический корабль "Зонд-6". Запуск осуществлялся по программе облёта Луны экипажем из двух человек. Официально целью миссии был беспилотный облёт и фотографирование Луны, а также возвращение спускаемого аппарата на Землю. Фактически это был готовый корабль для облёта луны с экипажем. "Зонд-6" успешно вышел на орбиту Луны 14 ноября. Зонд-6 осуществил облёт Луны, пройдя на расстоянии 2 420 километров от её поверхности и сделал черно-белые фотографии поверхности Луны.

On November 10, 1968 from Baikonur Cosmodrome the Soviet lunar spaceship Zond 6 was launched. Start was carried out according to the program of flight of the Moon by crew from two people. Officially pilotless flight and photography of the Moon, and also return of the lander to Earth was the main purpose of that mission. Actually it was a ready ship for flight to the moon with crew. "Zond 6" successfully orbited the Moon on November 14. It carried out flight of the Moon, having passed at distance of 2 420 kilometers from its surface and took black-and-white pictures of a Moon surface.

человек
[chilavèk]
-
Mensch
космический
[kasmicheskij]
-
kosmisch
корабль
[karabl`]
-
Schiff
километр
[kilametr]
-
Kilometer
готов
[gatov]
-
bereit
фотографировать
[fotagrafìravat']
-
fotografieren
фотография
[fatagrafiya]
-
Fotografie
программа
[pragrama]
-
Programm
луна
[luna]
-
Mond
Schlagworte: Wissenschaft , Inventions

Andere Nachrichten auf dieses Thema: Wissenschaft , Inventions

Фотография, победившая в конкурсе "ЛЕГО" [fatagrafiya, pabidifshaya f konkurse "lega"] - The photo that won the "LEGO" contest
Schlagworte: Kunst , Inventions, Culture
В июле 1965 года благодаря космическому аппарату Маринер-4 были впервые обнаружены кратеры на поверхности Марса. Фотографии кратеров были сделаны камерами космического аппарата во время близкого пролёта вблизи Красной Планеты 14-15 июля, а затем были отправлены на Землю.

In July, 1965 thanks to the Mariner-4 spacecraft craters on the surface of Mars were for the first time found. Photos of craters were made by spacecraft cameras during the close flight near the Red Planet on July 14-15, and then sent to Earth.

впервые
[fpirvye]
-
zum ersten mal
фотография
[fatagrafiya]
-
Fotografie
красный
[kràsnyj]
-
rot
космический
[kasmicheskij]
-
kosmisch
близкий
[bliskij]
-
nah, nicht weit; näher
Schlagworte: Wissenschaft , Showplaces
Ожерелье - это украшение, которое женщины носят вокруг шеи. Ожерелья в виде бус являются одними из древнейших видов украшений, известных людям с эпохи палеолита. Несмотря на то, что сегодня ожерелье - это украшение предназначенное исключительно для женщин, в древние времена во многих культурах мужчины также носили ожерелья.

Necklace is a decoration which women wear around a neck. Necklaces in the form of beads are one of the most ancient types of the jewelry known to people since paleolith era. In spite of the fact that today the necklace is a jewellery intended only for women in ancient times in many cultures men also wore necklaces.

ожерелье
[azhirèl'e]
-
Halskette
вокруг
[vakruk]
-
um... herum
женщина
[zhèhnsshina]
-
Frau
древний
[drevnij]
-
uralt
Schlagworte: Inventions
Из расплавленного песка делают стекло. При этом песок плавится при температуре тысяча семьсот градусов. Однако если к песку добавить обычной соды, то температура его плавления понижается до семисот градусов Цельсия.

Glass is made from the melted sand. At the same time sand melts up at the temperature of one thousand seven hundred degrees. However if to add usual sodium to sand, then temperature of its melting goes down to seven hundred degrees Celsius.

тысяча
[tysyacha]
-
tausend
температура
[timpiratura]
-
temperatur
семьсот
[sem`sot]
-
siebenhundert
песок
[pisok]
-
sand
однако
[adnako]
-
aber
добавить
[dobavit']
-
hinzufügen
градус
[gradus]
-
Grad
причина
[prichina]
-
Ursache
Schlagworte: Natur, Inventions
Übersetzung
Übersetzung (ru-de)
Nur registrierte Nutzer können diese Funktion benutzen